Fire is no fun and can never be taken for granted. A fire emergency can happen anytime, causing damage to property and life. Climatic conditions, lit cigarette butts, dry lightning, electrical faults, and many more contribute to these fires. Fire can occur anywhere and at any time, but you can reduce the damage to life and property with the correct protection systems.

Whether you’re in a commercial, industrial, or institutional facility, choosing the proper sprinkler protection is the first step in safeguarding your assets and personnel. A fire sprinkler system is an active fire protection measure. It consists of a water supply system, providing adequate pressure and flow rate to a water distribution piping system, onto which fire sprinklers are connected. A fire sprinkler system can prevent property damage and reduce the risk of injury to workers, customers, or tenants.

How Do Fire Sprinklers Work?

Sprinkler systems are among the most helpful tools in your firefighting arsenal. Fire sprinklers are certainly something you require in your commercial property! But how do fire sprinklers work? VR Fire Safety “Fire Fighting Systems Company in Noida” answer how fire sprinklers save your home and company from significant damage.

Fire Sprinklers Detect Heat:- Fire sprinklers work because high heat triggers the sprinkler system. When a fire burns, the air directly above it heats quickly. This hot air expands and spreads along with the ceiling. When the air is hot enough and reaches a sprinkler head, it triggers a chain response.

Most sprinkler heads highlight a glass bulb filled with a glycerin-based liquid. This liquid increases when it comes in contact with air heated to between 135 and 165 degrees. When the liquid increases, it breaks its glass confines, and the sprinkler head activates.

Fire Sprinklers Douse the Fire:- Each sprinkler head is attached to a pipe that connects to a reliable water source outside the home/building. When the heat begins a sprinkler head, a valve opens, allowing pressurized water from the pipe system to flow out.

It’s important for water in a fire sprinkler system to be pressurized. This permits the water to spray outward in an arc to extinguish the fire and prevent it from reigniting completely.

Fire Sprinklers Minimize Water Damage:- In movies, sprinkler systems work misleadingly, leading many people to believe that all the sprinklers in a system joined together, and when triggered by the heat of the fire, they all activate.

Most of the time, fires can completely extinguish after just one or two sprinklers activate. This allows water damage to be limited to the small area where the fire started. Plus, since fire sprinklers extinguish fires with about six times less water than a fire hose, their immediate action is actually less damaging to your property than a visit from the fire department.

Types of Fire Sprinkler Systems

Fire protection is of the utmost importance in commercial buildings in case of an emergency. One of the best preventative measures to take for the safety of your employees and your property is installing fire sprinkler systems. There are four main types of fire sprinkler systems that address the needs of your facility.

There are four main types of a fire sprinkler system:

  1. Wet Pipe Sprinklers – This is the most commonly installed type of sprinkler in buildings. As their name suggests, wet pipe sprinklers always filled with water. This allows them to respond quickly, should a fire occur. They are also A high rise, or multi-floor office building would be a typical commercial property where these are installed. The main benefit of this system is that it can significantly decrease damage in the event of a false alarm since only one sprinkler head will be activated. This type of fire sprinkler system is known for being typically low maintenance and cost-efficient.
  2. Dry Pipe Sprinklers – In locations that experience cold climates, the wet pipe sprinklers may be at risk of freezing and becoming ineffective. In this situation, the dry pipe sprinklers system, which is filled with air as opposed to water in the pipe system, is recommended. Like pre-action systems, dry pipe sprinklers use pressurized air in the pipes, which exit before the water and control the fire. They feature a fast opening tool that helps clear the pipe of air and increases the speed of the water flow.
  3. Pre-Action Sprinklers – These are hybrid fire protection systems designed to take advantage of the flexibility of wet pipe systems and the complexity of dry pipe sprinklers. Pre-action sprinklers are effective and helpful, in that they can be set to prevent water from coming out of them should a mechanical breakdown. The pre-action system is typically suitable for places where sprinklers are only required when an actual fire occurs so that water loss is not as prevalent. These areas may include libraries, data centers, or other places with high-value items.
  4. Deluge – This sprinkler system is designed without the heat-sensing elements in both wet and dry pipe systems, similar to a pre-action system, the deluge sprinkler system required to heat or smoke detector as well. This system features open nozzles that may be used when a fire occurs. This type of system is not generally used at homes but is mainly found in industries with flammable liquids.

Whether you need fire sprinklers installed, tested, inspected or repaired, contact VR Fire Safety today. As an experienced and the Best “Fire Fighting Systems Company in Noida” We will work with you to design and install a fire sprinkler system that fits the needs of your facility.